Continuous process for the production of polyester for food packaging

Claim 1

A continuous process for making a modified ethylene terephthalate polymer having an intrinsic viscosity of at least 0.60 dl/g, measured by dissolving 125 mg of polyester in 25 ml of a mixture of phenol and 1,2-dichlorobenzol (ratio 3:2 by weight) at 25° C., a free acetaldehyde content measured on pellets of less than 0.5 ppm and a bound acetaldehyde content of less than 5.0 ppm comprising (a) introducing a polyethylene terephthalate precondensate modified with 0.5 to 10 weight percent of one or more comonomers, said precondensate having an intrinsic viscosity of 0.18 to 0.50 dl/g, into a polycondensation reactor, (b) melt polycondensing said precondensate at an increasing temperature in the range of 268° to 288° C. in the presence of a polycondensation catalyst to produce a polycondensate at the reactor outlet having an intrinsic viscosity of 0.60 to 0.95 dl/g, 25 to 45 meq/kg of carboxyl-end groups and a free acetaldehyde content of less than 30 ppm, (c) passing said polycondensate from said reactor into a pelletizer, whereby between the outlet of the reactor and the outlet of the pelletizer the temperature is maintained at a temperature not higher than the temperature at the reactor outlet and for a residence time corresponding to an increase of free acetaldehyde of less than 30 ppm, to produce amorphous pellets with a specific surface area of 1.8 to 2.9 m 2 /kg, (d) hardening said amorphous pellets which have a first-softening temperature in the range of 60° to 75° C. (Te-1), measured in a TMAanalyzer at a heat-up rate of 2° C./min., at a temperature between 30° C. and Te-1 in the presence of a gas taken from air, CO 2 , N 2 or mixtures thereof, the dew point of which is below the hardening temperature, and for a time sufficient for the first-softening temperature (Te-2) to increase by 2° to 12° C. relative to Te-1, (e) crystallizing said hardened pellets at a temperature in the range of between Te-2 and 230° C. in the presence of a gas taken from air, CO 2 , N 2 or mixtures thereof, the dew point of which is below -20° C., the mass ratio of gas to pellets being in the range of 0.05-12.0 to 1.0 and for a time sufficient for the first-softening temperature (Te3) to increase by 100° to 150° C. relative to Te-2 and to a value which lies within the temperature range at which the solid phase polycondensation subsequently is carried out in step (f), and (f) subjecting said crystallized pellets to dealdehydization at a temperature in the range of 175° to 225° C. in a gas taken from air, CO 2 , N 2 or mixtures thereof, the dew point of which is below -20° C., the mass ratio of gas to pellets being in the range of 0.05-10.0 to 1.0 for a time sufficient to attain predetermined acetaldehyde and intrinsic viscosity values.